Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: Martin Volf <mv@inv.cz>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Does anyone have a working proxyARP setup?
Date: Tue, 12 Oct 2004 16:55:45 +0000	[thread overview]
Message-ID: <416C0C91.5090108@inv.cz> (raw)
In-Reply-To: <41676C12.72F7D09D@iswest.com>

gypsy wrote:
>>Could you please post the output of 'route -n', 'ip route' and 'ip neigh
>>show' as well as any 'ip route [add|del|*]' commands you run?
> 
> I guess not.  Martin, is there some reason you do not wish to post these
> things?

Hello,

sorry for the delay. I have used something like this:

router:
ifconfig eth0 172.16.7.42 netmask 255.255.255.0 broadcast 172.16.7.255
route add default gw 172.16.7.1
ifconfig eth1 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255
ifconfig eth2 192.168.1.1 netmask 255.255.255.255 -broadcast
route add -host 192.168.1.17 device eth2
route add -host 192.168.1.18 device eth2
route add -host 192.168.1.19 device eth2
echo 1 > /proc/sys/net/ipv4/conf/eth1/proxy_arp
echo 1 > /proc/sys/net/ipv4/conf/eth2/proxy_arp

The network 192.168.1.0/24 is divided into two parts, ip addresses 
192.168.1.17, .18, .19 are connected to eth2, other ip addresses to eth1.

192.168.1.17:
ifconfig eth0 192.168.1.17 netmask 255.255.255.0 broadcast 192.168.1.255
route add default gw 192.168.1.1

traceroute from 192.168.1.17 do 192.168.1.2:
  1  192.168.1.1  1.08 ms  0.73 ms  0.723 ms
  2  192.168.1.2  0.85 ms  0.77 ms  0.715 ms

"arp -an" at 192.168.1.17:
? (192.168.1.1) at 00:00:B4:9F:A4:58 [ether] on eth0
? (192.168.1.2) at 00:00:B4:9F:A4:58 [ether] on eth0
(note the same MAC address)

HTH,

-- 
Martin
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

      parent reply	other threads:[~2004-10-12 16:55 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-10-09  4:41 [LARTC] Does anyone have a working proxyARP setup? gypsy
2004-10-09  8:05 ` Martin Volf
2004-10-09 17:46 ` gypsy
2004-10-12 13:33 ` gypsy
2004-10-12 16:55 ` Martin Volf [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=416C0C91.5090108@inv.cz \
    --to=mv@inv.cz \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox