From mboxrd@z Thu Jan 1 00:00:00 1970 From: gypsy Date: Fri, 26 Nov 2004 05:40:06 +0000 Subject: Re: [LARTC] simple dual Internet connection setup not sending return Message-Id: <41A6C1B6.7078DDB8@iswest.com> List-Id: References: <1101398346.8287.66.camel@pc> In-Reply-To: <1101398346.8287.66.camel@pc> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org "Brian J. Murrell" wrote: > > I have a very simple setup exactly as described in the HOWTO section " > 4.2. Routing for multiple uplinks/providers". > > My iptables "nat" setup looks like this: > > Chain POSTROUTING (policy ACCEPT 364 packets, 26735 bytes) > pkts bytes target prot opt in out source destination > 258 19801 eth1_masq all -- * eth1 0.0.0.0/0 0.0.0.0/0 > 0 0 ppp0_masq all -- * ppp0 0.0.0.0/0 0.0.0.0/0 > Any ideas what I am doing wrong? > > b. Guessing from the lack of any mention of KeepState in your iptables setup, my guess is that you ignored the advice to vist Julian Anastasov's web site. Start with this: http://www.geocities.com/mctiew/ffw/dual.htm You should also google LARTC "Finally: A working case of two adsl load balance". Read Ron Senykoff's post "load balance a file download across two connections - success!". gypsy _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/