From: Amit Vyas <amitvyas_cse@hotpop.com>
To: lartc@vger.kernel.org
Subject: [LARTC] Simple case here!
Date: Tue, 28 Dec 2004 14:52:35 +0000 [thread overview]
Message-ID: <41D17063.6030406@hotpop.com> (raw)
Hi All,
I want to setup a machine to connect to internet at a limited rate of 64
kbps.
That machine is connected to a switch. so my LAN and Internet both comes
from the same eth0.
How can I limit only the internet access from this machine to 64kbps and
still using 100mbps for LAN
I am trying to implement this Please guide me If i am wrong.
I mark all the packets going out to LAN.
Then I can setup a root qdisc to classify packets based on that mark. If
match then I can setup a class to accept those setup a fifo for those
packets. but if the packets are not for the LAN then i can pass them to
other class which is tbf shaping at rate 64kbps.
Am i right on these lines.
This is the setup
+------------+ eth0 +-----------+ internet
| machine |---------------| Switch |-------------
+------------+ +-----------+
trying to get some thing like this
root qdisc (CBQ or something)
/ \
/ \
/ \
/ \
class class
Internal LAN Pcakets Any other unclassified Packets
| |
| |
FIFO TBF (rate 64kbps)
Please Help me out with marking the packets and to classify them.
Just started off with Traffic Shaping. gigles...... : )
It is alos possible to alternatively to mark internet traffic as it
would be less in comparison to LAN and thus processor friendly.
Amit Vyas
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2004-12-28 14:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-28 14:52 Amit Vyas [this message]
2004-12-29 11:41 ` [LARTC] Simple case here! Amit Vyas
2005-01-02 0:34 ` Andy Furniss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41D17063.6030406@hotpop.com \
--to=amitvyas_cse@hotpop.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox