[LARTC] Filter question

[Andre Correa <andre.correa@pobox.com>]

Hi guys, I may not have made myself clear in my last message so I'll try 
   it easy this time. Maybe someone can send me some help.

I'm trying something like this:


# root stuff
tc qdisc add dev eth0 root handle 1: htb default 2
tc class add dev eth0 parent 1: classid 1:1 htb rate 50000kbit
# default class
tc class add dev eth0 parent 1: classid 1:2 htb rate 2000kbit

# root class for my "garanteed bandwidth" service
tc class add dev eth0 parent 1: classid 1:3 htb rate 10Mbit

# class for a 1Mbit shared bandwidth
tc class add dev eth0 parent 1:3 classid 1:1024 htb rate 1Mbit
# qdisc used to _make my life easier scripting classes numbers_
tc qdisc add dev eth0 parent 1:1024 handle 1024: htb default 250
# default class for this second qdisc
tc class add dev eth0 parent 1024: classid 1024:250 htb rate 32kbit

# each customer gets the following class and filter
tc class add dev eth0 parent 1024: classid 1024:1 htb rate 256kbit
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip dst
xxx.xxx.xxx.xxx/yy flowid 1024:1

# another customer...
tc class add dev eth0 parent 1024: classid 1024:2 htb rate 256kbit
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip dst
www.www.www.www/zzz flowid 1024:2


My problem is that this filters are created but they don't send traffic 
to the expected class. All traffic is going to 1:2 (default class). Can 
somebody tell me why?

I apreciate any help, I'm in trouble with this...

tks in advance.

Andre
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/