From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andreas Unterkircher <unki@netshadow.at>
Date: Sun, 22 May 2005 11:42:00 +0000
Subject: Re: [LARTC] Change HTB "final qdisc" of the default walk-throught
Message-Id: <42907008.1080604@netshadow.at>
List-Id: <lartc.vger.kernel.org>
References: <20050522111913.GE24989@polar.elf12.net>
In-Reply-To: <20050522111913.GE24989@polar.elf12.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

I think you can add a default class to your htb root-qdisc. As example

# tc qdisc add dev eth0 root handle 99: htb default 30
# tc class add dev eth0 parent 1:1 classid 1:10 htb rate 5mbit burst 15k
# tc class add dev eth0 parent 1:1 classid 1:20 htb rate 3mbit ceil 
6mbit burst 15k
# tc class add dev eth0 parent 1:1 classid 1:30 htb rate 1kbit ceil 
6mbit burst 15k

If the traffic isn't matched by any filter it will get to 1:30

Andreas

Robert Siemer wrote:

>Hello everybody!
>
>With a HTB qdisc:
># tc qdisc add dev eth0 root handle 99: htb
>
>How can I change the "final qdisc" of the default walk-throught class?
># tc qdisc add dev eth0 parent 99:0 handle 88: sfq
>results in: "RTNETLINK answers: Invalid argument"
>
>CBQ automatically creates a xx:0 root class where I can attach final
>qdiscs... - If there is a root class in htb, how is it named?
>
>
>This is a check of my understanding. - I don't need a solution of the
>problem (e.g. with a leaf default class). - I need an answer to my
>question and if it is not possible, the answer is: it's not possible...
>(-:
>
>
>Thanks,
>	Robert
>_______________________________________________
>LARTC mailing list
>LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>
>  
>

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc