From: Oliver Hookins <oliver.hookins@anchor.com.au>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] HTB traffic shaping odd effects
Date: Mon, 09 Jan 2006 02:44:01 +0000 [thread overview]
Message-ID: <43C1CDF1.8050805@anchor.com.au> (raw)
In-Reply-To: <43BE1D93.2040409@anchor.com.au>
Andy Furniss wrote:
> Oliver Hookins wrote:
>
>> Hi,
>>
>> I'm trying to perform some (what I consider) basic traffic shaping on
>> our network utilising HTB. I have mostly reused the example on the
>> lartc.org site:
>>
>> tc qdisc add dev eth0 root handle 1: htb default 10
>> tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbit burst 24k
>> tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50mbit ceil
>> 80mbit burst 19k
>
>
> burst 19k will limit you unless your HZ\x1000
Our HZ is 512.
>> tc class add dev eth0 parent 1:1 classid 1:20 htb rate 1mbit ceil
>> 1mbit
>> tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10
>> tc qdisc add dev eth0 parent 1:20 handle 20: sfq perturb 10
>> tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src
>> X.X.X.X flowid 1:20
>>
>> So we have a total of 100mbit to be used, the default class 1:10 gets
>> 50mbit and a ceiling of 80mbit whereas my test host X.X.X.X gets only
>> 1mbit in any situation. Some rate limiting is definitely happening,
>> but I am finding the outbound traffic is limited to 2mbit instead of
>> 1mbit. If I change the rate (to say 10mbit) the outbound traffic gets
>> up to again twice the rate (in this case 20mbit).
>
>
> Not sure can you show output of tc -s -d class ls dev eth0 while it's
> running at 2x speed.
class htb 1:1 root rate 100Mbit ceil 100Mbit burst 24Kb/8 mpu 0b cburst
132644b/8 mpu 0b level 7
Sent 741267447736 bytes 735629628 pkts (dropped 0, overlimits 0)
rate 4316188bps 22688pps
lended: 489885589 borrowed: 0 giants: 0
tokens: -78 ctokens: 6677
class htb 1:10 parent 1:1 leaf 10: prio 0 quantum 200000 rate 50Mbit
ceil 80Mbit burst 19Kb/8 mpu 0b cburst 106440b/8 mpu 0b level 0
Sent 740240463634 bytes 734522966 pkts (dropped 429910165, overlimits 0)
rate 4233957bps 22358pps
lended: 244988819 borrowed: 489885528 giants: 0
tokens: -293 ctokens: 6636
class htb 1:20 parent 1:1 leaf 20: prio 0 quantum 13107 rate 1Mbit ceil
1Mbit burst 2Kb/8 mpu 0b cburst 2Kb/8 mpu 0b level 0
Sent 755354078 bytes 755048 pkts (dropped 0, overlimits 0)
rate 84198bps 321pps backlog 4p
lended: 755220 borrowed: 61 giants: 0
tokens: -21517 ctokens: -21517
--
Regards,
Oliver Hookins
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
next prev parent reply other threads:[~2006-01-09 2:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-06 7:34 [LARTC] HTB traffic shaping odd effects Oliver Hookins
2006-01-06 9:17 ` Denis Ovsienko
2006-01-08 23:13 ` Oliver Hookins
2006-01-09 1:06 ` Andy Furniss
2006-01-09 1:11 ` Andy Furniss
2006-01-09 2:44 ` Oliver Hookins [this message]
2006-01-09 17:41 ` Andy Furniss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43C1CDF1.8050805@anchor.com.au \
--to=oliver.hookins@anchor.com.au \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox