From mboxrd@z Thu Jan 1 00:00:00 1970 From: Diego Cabrero Date: Tue, 10 Jan 2006 17:36:08 +0000 Subject: Re: [LARTC] Simple shaping question Message-Id: <43C3F088.5020001@e-attico.net> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Try chosing a lower limit for the 80th port at least 900-10, then add a=20 sfq qdisc down the 1:10, 1:20 and 1:30 classes like this: tc qdisc add dev eth0 parent 1:x0 handle 1: sfq perturb 10 It will work, i had that kind of problem before. Regards. -Diego Jonas Jasas escribi=F3: >I have linux box (does nat and firewall for small network) connected >to dsl. I want to set priorities for protocols (that nothing could >disturb web browsing). This is my rules (eth0 connected to internet): > >/sbin/tc qdisc del dev eth0 root >/sbin/tc qdisc add dev eth0 root handle 1 htb default 30 r2q 100 > >/sbin/tc class add dev eth0 parent 1: classid 1:2 htb rate 900Kbit burst 1= 5k > >/sbin/tc class add dev eth0 parent 1:2 classid 1:10 htb rate 900Kbit >ceil 900Kbit >/sbin/tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match >ip sport 80 0xffff classid 1:10 >/sbin/tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match >ip dport 80 0xffff classid 1:10 > >/sbin/tc class add dev eth0 parent 1:2 classid 1:20 htb rate 10Kbit ceil 9= 00Kbit > >I start to download from ftp it uses all bandwidth (as it should be), >when I start to download on web, web and ftp rated become more or less >equal :/ . I want that ftp traffic would be limited to 10kbit and all >other bandwidth would be left for web trafic. > >What is wrong with my rules? >Thank you for advice! >_______________________________________________ >LARTC mailing list >LARTC@mailman.ds9a.nl >http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > =20 > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc