From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Henrik Ostergaard Madsen" <Henrik@ostergaard.net>
Date: Fri, 03 Mar 2006 16:55:24 +0000
Subject: [LARTC] Multicast only working in promiscuous mode
Message-Id: <4408830C.24632.1D2751@localhost>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hi,

I am trying to set up a uPnP server on a Linux box (Debian Sarge Stable kernel 2.6.8). uPnP 
works using multicast packages for locating servers.

This does however seem to fail unless I set the relevant NIC in promiscuous mode. If I do so, 
it works well.

I have added

ip route add 224.0.0.0/4 dev eth0

and 
echo 1 >/proc/sys/net/ipv4/ip_forward

and the kernel is set up to enable multicast (and routing), extract from the .config of the 
kernel:


#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
 
The server is also used as a firewall using iptables and iproute2 and thus also serves as a 
gateway for the uPnP clients.

Something is missing, and I do not want the NIC to be in promiscuous mode permanently if it 
can be avioded. What do I do wrong? 

Regards

Henrik
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc