From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Furniss Date: Mon, 18 Sep 2006 13:48:28 +0000 Subject: Re: [LARTC] Re: htb traffic shaping problem Message-Id: <450EA3AC.2010100@andyfurniss.entadsl.com> List-Id: References: <6.2.0.14.2.20060912225307.02dd8f98@linux.sysreset.com> In-Reply-To: <6.2.0.14.2.20060912225307.02dd8f98@linux.sysreset.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org gypsy wrote: > Bugzilla-Redirect wrote: > >>Yes, the output is below: >>eth0 Link encap:Ethernet HWaddr 00:11:09:2A:A6:F6 >> inet addr:10.0.0.50 Bcast:10.0.0.255 Mask:255.255.255.0 >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:4244867 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:1306632 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:3898905509 (3.6 GiB) TX bytes:1756030081 (1.6 GiB) >> Interrupt:19 > > > Try a "quantum 1514" then; that is correct for an ethernet device with > an MTU of 1500. > > Perhaps reading the source code will give a clue about MPU and MTU? > Frankly, I'd set it to whatever works as long as the rest of the status > info looks right and not give a damn that it is huge. Even if ifconfig says 1500 there have been posts that say you don't get it with gig cards that do segmentation offload unless you can turn it off with ethtool. Apologies if this has already been said as I don't have all the thread. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc