From: Hampton Maxwell <maxwell@digitalpath.net>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Rewriting output interface
Date: Mon, 29 Jan 2007 22:41:48 +0000 [thread overview]
Message-ID: <45BE782C.7090405@digitalpath.net> (raw)
In-Reply-To: <45BE71C1.2090206@digitalpath.net>
We are using a madwifi type driver that supports wds. I just don't know how
to setup the dual-bonded part of it. If someone has experience doing this
with an ethernet only setup, I can adapt that to our network.
Cheers,
Hampton
Stephen Hemminger wrote:
> On Mon, 29 Jan 2007 14:14:25 -0800
> Hampton Maxwell <maxwell@digitalpath.net> wrote:
>
>> I would like to setup some rules for a wireless bridge to do load balancing.
>> I'd like to dedicate one radio for doing transmit and one for receive.
>>
>
> For most cases wireless bridge with Linux won't work. Unless you (one of the following):
> * have special device firmware
> * bridge only one client (ie point-to-point)
> * use MAC layer NAT
> * use experimental WDS and have device that supports it.
>
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
prev parent reply other threads:[~2007-01-29 22:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-29 22:14 [LARTC] Rewriting output interface Hampton Maxwell
2007-01-29 22:41 ` Hampton Maxwell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45BE782C.7090405@digitalpath.net \
--to=maxwell@digitalpath.net \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox