From: gypsy <gypsy@iswest.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Re: LARTC Digest, Vol 34, Issue 12
Date: Thu, 13 Dec 2007 02:42:35 +0000 [thread overview]
Message-ID: <47609C1B.AEBF7EEA@iswest.com> (raw)
In-Reply-To: <823158cf0712120830i63861d5fyc7c4836bd6fe2bf0@mail.gmail.com>
"m.a.t.e.o" wrote:
> #######
> for the MAC address: M0M1M2M3M4M5
>
> tc filter add dev eth1 parent 1: protocol ip prio 5 u32
> match u16 0x0800
> 0xffff at -2 match u16 0x4455 0xffff at -4 match u32
> 0x00112233 0xffffffff
> at -8 flowid 1:40
>
> #######
Have you tried "protocol all" rather than "protocol ip"? I tested
M0M1M2M3M4M5 (a long time ago) and it did work for eth1 and imq0.
I guess that when the interface it was used on "saw" the MAC specified
by it then I got a match. It did not work when the machine was too far
away (in # hops), probably because then the MAC is no longer "visible".
In short, M0M1M2M3M4M5 matched any computer on my internal LAN and the
gateway of my ISP but nothing else.
--
gypsy
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
prev parent reply other threads:[~2007-12-13 2:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-12 16:30 [LARTC] Re: LARTC Digest, Vol 34, Issue 12 m.a.t.e.o
2007-12-13 2:42 ` gypsy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47609C1B.AEBF7EEA@iswest.com \
--to=gypsy@iswest.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox