From: Darshan Purohit <purohitdarshan@gmail.com>
To: lartc@vger.kernel.org
Subject: [LARTC] Re: equal-cost multipath in 2.6.7
Date: Fri, 27 May 2005 15:45:46 +0000 [thread overview]
Message-ID: <5f1365705052708455f48a14e@mail.gmail.com> (raw)
Sending out this question again.
On 5/24/05, Darshan Purohit <purohitdarshan@gmail.com> wrote:
> I have question about multipath routing. I am running a 2.6.7 kernel (gentoo).
> I have a route with three nexthops on the same interface. I see a
> different nexthop being picked for different destination addresses.
> All is fine.
>
> Now if one of the nexthop goes down (arp entry times out and arp
> request doesnt get a response), does it remove the nexthop from
> contention and only use the remaining two from this point on ? What
> about the flows for which this nexthop was chosen in the recent past.
> Would they move to a different nexthop ?
>
> Can anyone please point me to implementation details about how a
> nexthop is chosen and what is the algorithm used in case of multipath
> routes and how to fine-tune the behaviour.
>
> Thanks.
> Darshan.
>
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
next reply other threads:[~2005-05-27 15:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-27 15:45 Darshan Purohit [this message]
2005-05-28 20:57 ` [LARTC] Re: equal-cost multipath in 2.6.7 gypsy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f1365705052708455f48a14e@mail.gmail.com \
--to=purohitdarshan@gmail.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox