From: Oswin Budiman <armahalma@gmail.com>
To: lartc@vger.kernel.org
Subject: [LARTC] HTB - ethloop - overlimits?
Date: Thu, 30 Dec 2004 04:50:06 +0000 [thread overview]
Message-ID: <67137473041229205078f134fd@mail.gmail.com> (raw)
Hi all,
I'm trying to setup htb on a box with the following class configuration:
class htb 1:2 root rate 4Mbit ceil 4Mbit burst 2099b/8 mpu 0b overhead
0b cburst 2099b/8 mpu 0b overhead 0b level 7
Sent 0 bytes 0 pkts (dropped 0, overlimits 0 requeues 0)
lended: 0 borrowed: 0 giants: 0
tokens: 4300 ctokens: 4300
class htb 1:4 parent 1:2 leaf 4: prio 7 quantum 1000 rate 1Kbit ceil
1Kbit burst 1599b/8 mpu 0b overhead 0b cburst 1599b/8 mpu 0b overhead
0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0 requeues 0)
lended: 0 borrowed: 0 giants: 0
tokens: 13107200 ctokens: 13107200
class htb 1:6 parent 1:2 leaf 6: prio 0 quantum 12500 rate 1Mbit ceil
1Mbit burst 1724b/8 mpu 0b overhead 0b cburst 1724b/8 mpu 0b overhead
0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0 requeues 0)
lended: 0 borrowed: 0 giants: 0
tokens: 14131 ctokens: 14131
class htb 1:7 parent 1:2 leaf 7: prio 0 quantum 37500 rate 3Mbit ceil
3Mbit burst 1974b/8 mpu 0b overhead 0b cburst 1974b/8 mpu 0b overhead
0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0 requeues 0)
lended: 0 borrowed: 0 giants: 0
tokens: 5392 ctokens: 5392
and then I try to simulate the traffic using ethloop to see it it's work.
I use the following script to generate the packet on ethloop. I'm
using loopback interface.
# Set interface
0 i 0 lo
0 i 1 lo
# Set packet size
0 S 0 1k
0 S 1 1k
# Determine flow id
0 P 0 0x10006
0 P 1 0x10007
# Start flow...
0 R 0 4000k
0 R 1 4000k
# Finish it.
10000 X 0 0
Foxtrot ethloop # ethloop < input > output
When it finish, I got weird output. When I see the tc stat, the flow
enters the right class but the rate is terribly wrong... I wonder what
happen to it? Here's the output file and tc stat.
Foxtrot ethloop # cat output
0.5 173183 98004 443 0 55401 57802 3 0
1.0 136001 118161 734 0 13147 13717 3 0
1.5 128969 124736 735 0 3120 3255 3 0
2.0 125141 124136 735 0 740 772 3 0
2.5 125825 125586 735 0 176 183 3 0
3.0 124266 129381 735 0 42 44 3 0
3.5 125977 125555 736 0 10 10 3 0
4.0 129326 127894 735 0 2 3 3 0
4.5 125209 124869 737 0 1 1 3 0
5.0 124410 129449 128 0 0 0 3 0
5.5 125842 125418 417 0 0 0 3 0
6.0 128815 128714 706 0 0 0 3 0
6.5 125021 124997 736 0 0 0 3 0
7.0 127941 127936 735 0 0 0 3 0
7.5 124749 124748 736 0 0 0 3 0
8.0 128248 127326 735 0 1113 1113 2 0
8.5 125319 125100 735 0 264 264 2 0
9.0 127961 126230 735 0 63 63 2 0
9.5 124722 124311 735 0 15 15 2 0
10.0 127203 127105 736 0 4 4 2 0
Foxtrot ethloop # qd lo
qdisc htb 1: r2q 10 default 4 direct_packets_stat 0 ver 3.17
Sent 2728960 bytes 2665 pkts (dropped 0, overlimits 3996 requeues 0)
qdisc sfq 4: parent 1:4 limit 128p quantum 16450b flows 128/1024 perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0 requeues 0)
qdisc sfq 6: parent 1:6 limit 128p quantum 16450b flows 128/1024 perturb 10sec
Sent 2297856 bytes 2244 pkts (dropped 0, overlimits 0 requeues 0)
qdisc sfq 7: parent 1:7 limit 128p quantum 16450b flows 128/1024 perturb 10sec
Sent 431104 bytes 421 pkts (dropped 0, overlimits 0 requeues 0)
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2004-12-30 4:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-30 4:50 Oswin Budiman [this message]
2004-12-30 15:46 ` [LARTC] HTB - ethloop - overlimits? Stef Coene
2005-01-03 3:04 ` Oswin Budiman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=67137473041229205078f134fd@mail.gmail.com \
--to=armahalma@gmail.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox