From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Logu" <logumail@gmx.net>
Date: Tue, 08 Jun 2004 13:17:11 +0000
Subject: [LARTC] Is it possible to control uplink in a NATted environment
Message-Id: <7faa01c44d59$4ae7a660$140110ac@lorco>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hi all,

Given below ia the simple network diagram. I need to control uplink for the
individual private network IPs as depicted in the diagram. Is this possible
in a NATed environment using CBQ or HTB. I learnt that we can control only
outgoing traffic. So if I control in the eth1 interface the source IP will
be masqueraded, and it may not result in the desired behaviour.

Is there a solution to address this issue.

                              GATEWAY

  private net work   |-----------|
 -------------------|                 |------------------------Internet
                      eth0 |-----------| eth1 NAT

Thanks
-logu

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/