From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Sergio Hormaetxe Gallego" Date: Mon, 13 Sep 2004 12:19:04 +0000 Subject: [LARTC] a doubt about cbq Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org i have sent before a mail but i haven=B4t realised that perhaps this list=20 is in english. well, first of all, sorry for my english :) i=B4ve just started with linux and i have a project a bit big for me=20 which i have to show soon... i want to run cbq.init and i can=B4t=20 (cbq.init is a script to control the bandwidth in your net) i have a debian woody 3.0 with the kernel 2.4, with all the QoS=20 modules, and installed the iproute. the problem is that all the=20 commands generated by the script for the tc give an error:=20 tc qdisc add dev eth0 root handle 1 cbq bandwidth 100Mbps avpkt 1000=20 cell 8=20 RTNETLINK answers: Invalid argument=20 i have been looking the man of tc and the order of the parameters is=20 different so i think i need another version of tc which admit the=20 parameters generated by the cbq.init. but although i find in the=20 internet i don=B4t find nothing... i downloaded the "iproute_20010824- 8woody1_i386.deb" because of the name but it does the same...=20 has somebody run this script in this conditions? well, i hope i had=20 explain in the correct way and thank u very much for the help... _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/