From: "Logu" <apachelog@yahoo.com>
To: lartc@vger.kernel.org
Subject: [LARTC] multipath routing problem
Date: Tue, 16 Oct 2001 10:34:14 +0000 [thread overview]
Message-ID: <marc-lartc-100322703711418@msgid-missing> (raw)
Hi,
My lan network is 192.16.1.0
I have linux box with two interface one with 192.16.1.1
and another is with 172.16.1.1
I have two router 172.16.1.204 and 172.16.1.205
I activated multipath routing by command
ip route add default nexthop via 172.16.1.204 dev eth0 nexthop via
172.16.1.205 dev eth0
but i was not able to communicate to internet.
Is my configuration is correct how to enable multipath routing to my
requirement.
-Logu
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
next reply other threads:[~2001-10-16 10:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-16 10:34 Logu [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-02-07 1:23 [LARTC] Multipath Routing Problem Charlie Meyer
2001-10-15 17:11 [LARTC] Multipath routing problem Pierrick Hascoet
2001-10-15 18:41 ` Julian Anastasov
2001-10-16 6:50 ` Pierrick Hascoet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-100322703711418@msgid-missing \
--to=apachelog@yahoo.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox