From mboxrd@z Thu Jan 1 00:00:00 1970 From: "vanitha" Date: Thu, 01 Nov 2001 03:34:09 +0000 Subject: [LARTC] cbq-fw classifier MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_005E_01C162B4.405A9C80" Message-Id: List-Id: To: lartc@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_005E_01C162B4.405A9C80 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi All, I was using CBQ to control the bandwidth rate , while i use the qdisc = cbq with u32 filter and route filter it is=20 working fine ,but when i use fw classifier it seems that the bandwidth = rate 100kbit is not picked. i have used the following commands=20 /sbin/iptables -I PREROUTING -t mangle -p tcp -d 172.16.1.81 -j MARK = --set-mark 1 /sbin/tc qdisc add dev eth0 root handle 1: cbq bandwidth 10Mbit cell 8 = avpkt 1000 mpu 64 /sbin/tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 10Mbit = rate 10Mbit allot 1514 cell 8 weight 1Mbit prio 8 maxburst 20 avpkt 1000 /sbin/tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 10Mbit = rate 100Kbit allot 1514 cell 8 weight 10Kbit prio 3 maxburst 20 avpkt = 1000 /sbin/tc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 1 fw = classid 1:2 is that anything i have missed out ? i have tested these commands using Linux-2.4.10. Advance Thanks Vanitha ------=_NextPart_000_005E_01C162B4.405A9C80 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hi All,

I was using CBQ to control the = bandwidth rate ,=20 while i use the qdisc cbq with u32 filter and route filter it is =

working fine ,but when i use fw = classifier it seems=20 that the bandwidth rate 100kbit is not picked.

i have used the following=20 commands

/sbin/iptables -I PREROUTING -t mangle = -p tcp -d=20 172.16.1.81 -j MARK --set-mark 1

/sbin/tc qdisc add dev eth0 root handle = 1: cbq=20 bandwidth 10Mbit cell 8 avpkt 1000 mpu 64
/sbin/tc class add dev eth0 = parent=20 1:0 classid 1:1 cbq bandwidth 10Mbit rate 10Mbit allot 1514 cell 8 = weight 1Mbit=20 prio 8 maxburst 20 avpkt 1000
/sbin/tc class add dev eth0 parent 1:1 = classid=20 1:2 cbq bandwidth 10Mbit rate 100Kbit allot 1514 cell 8 weight 10Kbit = prio 3=20 maxburst 20 avpkt 1000

/sbin/tc filter add dev eth0 protocol = ip parent 1:0=20 prio 1 handle 1 fw classid 1:2

is that anything i have missed out = ?

i have tested these commands using=20 Linux-2.4.10.

Advance Thanks

Vanitha

------=_NextPart_000_005E_01C162B4.405A9C80-- _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/