From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Sebastian 'spax' Pape" Date: Tue, 27 Nov 2001 13:59:53 +0000 Subject: Re: [LARTC] Does this work: CBQ on PPP over a PTY Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org hi! > What did you set as 'bandwidth'? The bandwith of the ethernet you are > sending to? The bandwidth of your cable modem? I am using cbq with the roaring penguin pppoe and cbq is working fine for outgoing traffic here. I set the speed of my ethernet as bandwidth and created a root-class with the speed of my adsl as rate. If I look at the incoming traffic it shows that it only does anything if the rate of the root class is approx. half of my available bandwidth. It seems that cbq miscalculates something - but I'm not sure. I sent my config to the list some time ago and askes for advice - but nothing seemed wrong. best regards Sebastian -- Sebastian 'spax' Pape | If you're not part of the solution, be part of mailto: sebastian@p-a-p-e.de | the problem! pgp: http://p-a-p-e.de/pgp.asc | --- Do you want to know more? http://www.p-a-p-e.de/ --- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/