From mboxrd@z Thu Jan 1 00:00:00 1970 From: bert hubert Date: Thu, 06 Dec 2001 20:01:36 +0000 Subject: Re: [LARTC] Re: burst / minburst, etc. Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thu, Dec 06, 2001 at 02:59:40PM -0500, Michael T. Babcock wrote: > On Thu, Dec 06, 2001 at 08:48:11PM +0100, bert hubert wrote: > > > tc class add dev eth0 parent 1: classid 1:1 htb rate 20Mbit burst 4kB > > > tc qdisc add dev eth0 parent 1:1 sfq > > > > Raise burst, for 20Mbit it needs to be at least 20kbyte! > > Is there any good documentation on setting minburst/maxburst on CBQ as > well as burst rates for other queuing disciplines as mentioned above? HTB is implemented on its own page, and mentions the bucket sizes needed. CBQ is only documented on http://ds9a.nl/lartc ... (it also mentions minburst). Regards, bert -- http://www.PowerDNS.com Versatile DNS Software & Services Trilab The Technology People Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/