From mboxrd@z Thu Jan 1 00:00:00 1970 From: "yangrunhua" Date: Tue, 11 Dec 2001 09:35:46 +0000 Subject: RE: [LARTC] HTB problem Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Sorry,forget sth. Ifconfig sees: RX bytes:22970234 (21.9 Mb) TX bytes:1741892 (1.6 Mb) But: # tc -s -d qdisc qdisc htb 1: dev eth0 r2q 10 default 2 dcache 0 deq_util 1/1000000 deq_rate 11 trials_per_deq 0 dcache_hits 0 Sent 1301198 bytes 14448 pkts (dropped 0, overlimits 3944) Why? -----Original Message----- From: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl] On Behalf Of bert hubert Sent: 2001=C4=EA12=D4=C211=C8=D5 17:21 To: lartc@mailman.ds9a.nl Subject: Re: [LARTC] HTB problem On Tue, Dec 11, 2001 at 10:46:08AM +0800, yangrunhua wrote: > tc class add dev eth1 parent 1: classid 1:1 htb rate 10kbps ceil 10kbps > burst 2k > why the client run into 1:1 can keep 430 KB/s ? Show your entire configuration, please. Regards, bert hubert --=20 http://www.PowerDNS.com Versatile DNS Software & Services Trilab The Technology People Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/