From: "glynn" <glynn@itextron.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Gre Tunneling Problem
Date: Mon, 07 Jan 2002 00:58:46 +0000 [thread overview]
Message-ID: <marc-lartc-101045059624128@msgid-missing> (raw)
In-Reply-To: <marc-lartc-101039544916808@msgid-missing>
Hello Christoph, actually I havent done with netfilter rules and i dont have
any restrictions applied for the linux, its a normal configuration, I also
enable the forwarding under the /proc/sys/net/ipv4/ip_forward with the value
of 1. can you figure out whats the problem? thanks
Glynn
----- Original Message -----
From: "Christoph Simon" <ciccio@kiosknet.com.br>
To: "glynn" <glynn@itextron.com>
Cc: <lartc@mailman.ds9a.nl>
Sent: Monday, January 07, 2002 7:41 PM
Subject: Re: [LARTC] Gre Tunneling Problem
> On Sun, 6 Jan 2002 17:39:46 +0800
> "glynn" <glynn@itextron.com> wrote:
>
> > Hello everyone, I have a problem regarding gre tunneling, I have two
> > linux box both of them has a private network and the linux A is
> > connected to the internet via wireless radio and the other linux B is
> > connected to the internet via lease line. Here is the setup of my two
> > linux box
> >
> > Linux A
> > eth0 = 203.189.x.1 (internet)
> > eth1 = 192.168.1.1 (going to hub private network)
> >
> > Linux B
> > eth0 = 205.198.x.1 (internet)
> > eth1 = 192.168.2.1 (going to hub private network)
> >
> > here is my configuration in Linux A and B. I also load the modules
> > needed (insmod ip_gre)
> >
> > Linux A
> > ip tunnel add netb mode gre remote 205.198.x.1 local 203.189.x.1 ttl 255
> > ip link set netb up
> > ip addr add 192.168.1.1 dev netb
> > ip route add 192.168.2.0/24 dev netb
> >
> > Linux B
> > ip tunnel add neta mode gre remote 203.189.x.1 local 205.198.x.1 ttl 255
> > ip link set neta up
> > ip addr add 192.168.2.1 dev neta
> > ip route add 192.168.1.0/24 dev neta
> >
> > I could ping both sides the eth0 and also the eth1 with is for the
> > private network, here is my problem i couldnt ping the other private ip
> > addresses which my eth1 is connected to the hub, anyone can help me,
> > whats my error. pls reply asap. thanks
>
> Do you have any netfilter rules not letting pass proto 47? You'll also
> have to allow forwarding.
>
> --
> Christoph Simon
> ciccio@kiosknet.com.br
> ---
> ^X^C
> q
> quit
> :q
> ^C
> end
> x
> exit
> ZZ
> ^D
> ?
> help
> .
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
next prev parent reply other threads:[~2002-01-07 0:58 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-01-06 9:39 [LARTC] Gre Tunneling Problem glynn
2002-01-07 0:58 ` glynn [this message]
2002-01-07 1:48 ` glynn
2002-01-07 4:04 ` glynn
2002-01-07 6:28 ` glynn
2002-01-07 6:35 ` glynn
2002-01-07 9:40 ` glynn
2002-01-07 10:21 ` glynn
2002-01-07 11:41 ` Christoph Simon
2002-01-08 0:56 ` Christoph Simon
2002-01-08 1:01 ` Joe Patterson
2002-01-08 1:07 ` glynn
2002-01-08 1:15 ` glynn
2002-01-08 1:18 ` Christoph Simon
2002-01-08 4:54 ` Greg Scott
2002-01-08 7:28 ` glynn
2002-01-08 9:14 ` Christoph Simon
2002-01-08 9:48 ` Christoph Simon
2002-01-08 12:40 ` Greg Scott
2002-01-09 2:44 ` Greg Scott
2002-01-09 3:02 ` glynn
2002-01-09 14:27 ` Michael T. Babcock
2002-01-09 17:49 ` Greg Scott
2002-01-09 17:58 ` Michael T. Babcock
2002-01-09 18:28 ` Greg Scott
2002-01-09 18:43 ` Michael T. Babcock
2002-01-09 19:40 ` Greg Scott
2002-01-11 14:21 ` Greg Scott
2002-01-11 15:20 ` Joe Patterson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-101045059624128@msgid-missing \
--to=glynn@itextron.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox