From: ronald.phannee@planet.nl
To: lartc@vger.kernel.org
Subject: [LARTC] basic question about token bucket filter
Date: Sun, 20 Jan 2002 14:55:49 +0000 [thread overview]
Message-ID: <marc-lartc-101153861627204@msgid-missing> (raw)
Hi there,
I just started playing around with prioritizing traffic. However I do have
some questions left :P
I am using the following setup:
tc qdisc add dev ppp0 root handle 1: prio
tc qdisc add dev ppp0 parent 1:1 handle 10: sfq
tc qdisc add dev ppp0 parent 1:2 handle 20: tbf rate 61kbit latency 50ms burst 1540
tc qdisc add dev ppp0 parent 1:3 handle 30: sfq
I use the mangle table of iptables to force the TOS bit (based on the
tcp src or tcp dst port) in order to sent interactive traffic to band 0
(1:1), bulk traffic to band 2 (1:3) and remaining traffic to band 1 (1:2).
This seems to work. I do see packets flow trough the mangle table
(iptables -t mangle -vnL) and I do see interactive traffic go band 0 ,
etc.. (tc -s qdisc ls dev ppp0).
However I do not notice much of a difference. While downloading some linux
kernels a telnet session still slows down a lot :( Any ideas how this
might be possible?
Best regards,
--
Ronald Verlaan
http://80.60.86.86
ronald.phannee@planet.nl
--------------------------------------------------------------------------
Five is a sufficiently close approximation to infinity.
-- Robert Firth
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
next reply other threads:[~2002-01-20 14:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-01-20 14:55 ronald.phannee [this message]
2002-01-20 15:15 ` [LARTC] basic question about token bucket filter Jasper Spaans
2002-01-20 15:25 ` ronald.phannee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-101153861627204@msgid-missing \
--to=ronald.phannee@planet.nl \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox