From: "suresh" <super772002@yahoo.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Newbie question
Date: Thu, 28 Feb 2002 12:30:35 +0000 [thread overview]
Message-ID: <marc-lartc-101489824032123@msgid-missing> (raw)
In-Reply-To: <marc-lartc-101480860824396@msgid-missing>
Hi Ard,
Actually i need to distribute the traffic to two different routers.
So I tried to send traffic from 172.16.1.0/24 to a.b.c.d and another network
through
w.x.y.z
Thanks
Suresh
> On Wed, Feb 27, 2002 at 04:29:23PM +0530, suresh wrote:
> > I have two Internet link and two LAN networks
> > I have Redhat-7.1 linux-2.4.17 kernel and 2 NICs
> > In eth0 172.16.1.1 and eth0:1 192.168.1.1
> > in eth1 are public ips of isps as eth1 a.b.c.d and eth1:0 w.x..y.z
> >
> > I want do source routing using ip rule command.
> >
> > echo 200 isp1 >> /etc/iproute2/rt_tables
> > ip rule add from 172.16.1.0/24 table isp1
> > ip rule ls
> > 0: from all lookup local
> > 32765: from 172.16.1.0/24 lookup isp1
> > 32766: from all lookup main
> > 32767: from all lookup default
> >
> > ip route add default via a.b.c.d dev eth1 table isp1
> > ip route flush cache
> >
> > Its work fine when request comes from 172.16.1.0 netwok
> >
> > When i add
> > ip route add default via w.x.y.z dev eth1
> >
> > to forward request from another lan network it works fine
> > but req from 172.16.1.0 does not work
> >
> > if i remove
> > ip route del default via w.x.y.z dev eth1
> >
> > its work well.
> >
> > Did i leaveout anything in configuration?
> Yep: by adding the rule:
> ip rule add from 172.16.1.0/24 table isp1
> everything *WILL* go to table isp1.
> In my experience everything even local traffic that matches the rule
> will go to the isp1 table, and hence will be routed to the gateway.
>
> Use a normal routing table for isp1:
> For instance:
> ip route add 172.16.1.0/24 dev {right device} scope link
> to make sure that you can still route back to 172.16.1.0...
>
> Anyway: tcpdumping all of your interfaces will make you clear what is
> actually happenning.
>
> Thinking about it: it only contains a default route, which means, it
> only knows that it should route to that default gateway.
> The default is I guess some sort of end point in a routing table.
>
> --
> <ard@telegraafnet.nl> Telegraaf Elektronische Media http://wwwijzer.nl
> http://leerquoten.monster.org/ http://www.faqs.org/rfcs/rfc1855.html
> Let your government know you value your freedom. Sign the petition:
> http://petition.eurolinux.org/
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2002-02-28 12:30 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-27 11:11 [LARTC] Newbie question suresh
2002-02-28 11:44 ` Ard van Breemen
2002-02-28 12:30 ` suresh [this message]
2002-02-28 12:31 ` Arthur van Leeuwen
2002-02-28 13:24 ` Ard van Breemen
2002-12-16 15:58 ` [LARTC] newbie question Del Riesgo, Christopher D
2003-10-09 11:45 ` Muhammad Reza
2003-10-09 11:46 ` jeremie le-hen
2003-10-09 12:15 ` Muhammad Reza
2003-10-13 11:38 ` Muhammad Reza
2003-10-13 18:46 ` Stef Coene
2004-03-02 14:22 ` [LARTC] Newbie question Aravind babu
2004-03-03 5:45 ` Martin A. Brown
2004-09-28 7:35 ` Mark S. Nesterovich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-101489824032123@msgid-missing \
--to=super772002@yahoo.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox