From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajesh Revuru Date: Wed, 13 Mar 2002 14:16:24 +0000 Subject: [LARTC] (no subject) Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi Everyone.. I started using Tc and iam Newbie.. Iam trying to use simple TBF to drop the excessive traffic than the rate. ******* Scenario: ******* SRC 1,SRC 2 are sending 5MB traffic each to DEST. I have implemented TBF qdisc at Eth0 0f R1 Eth0 of R2 Eth0 & Eth1 of R3 Eth0 0f R4. the TBF applied is tc qdisc add dev eth0 root tbf rate 1mbit burst 5kb latency 350ms. ******** Result ******* But the destination is able to receive the whole traffic which is approx 10mb. I wanted to see only 1mbit of traffic and all the rest to be dropped. ******* Questions ******* 1) Is there any problem with interfaces.To know my knowledge we have to use qdisc for incoming interfaces? 2)Does the rate means the amount of traffic that can be filtered??? Please suggest me... ---| SRC|-----|------| |--------| |--------| ---| |Routr1|----| | | | |--- |------| | | | | | |Routr3|----|Routr4|--|DEST ---| |------| | | | | | SRC|-----|Routr2|----| | | | |---- ---| |------| |--------| |--------| __________________________________________________ Do You Yahoo!? Try FREE Yahoo! Mail - the world's greatest free email! http://mail.yahoo.com/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/