From mboxrd@z Thu Jan 1 00:00:00 1970 From: bert hubert Date: Sun, 14 Apr 2002 10:19:53 +0000 Subject: Re: [LARTC] Ingress policing Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Fri, Apr 12, 2002 at 05:09:14PM +0200, Jan Coppens wrote: > Hi all, > > Currently, I'm experimenting with ingress policing. Is it possible to > attach multiple u32 filters to the same policer or attach one policer to > multiple u32 filters? I would like to define a shared meter, so the rate > of the traffic that matches any u32 is accumulated. In the "Edge32-ca-u32" > example, they also use a shared meter, but I don't quite understand how > it's done. Can someone help me out? I'm not sure if I really understand you. But I *can* tell you that you do not attach policers to filters. The filter contains a policer. Regards, bert -- http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/