From: Christian Volk <cv5@tengeeks.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Tuning HTB
Date: Mon, 15 Apr 2002 08:09:09 +0000 [thread overview]
Message-ID: <marc-lartc-101885827102928@msgid-missing> (raw)
In-Reply-To: <marc-lartc-101885518601136@msgid-missing>
On Monday 15 April 2002 09:27, Stef Coene wrote:
> The setup is OK. But you have to be sure you are the bottleneck and not
> the modem. You can do this by lowering the maximium to 62 (or 63, just try
> some numbers). That way you are slowing down the internet link, but YOU
> are controlling it :)
Thanks!
Should the 1:1 rate be set to the interface rate (10 Mbit) or the connection
rate (64kbit)?
I'm currently trying:
1:1 htb rate 10 Mbit burst 12k
1:10 htb rate 50kbit ceil 62kbit burst 2k
1:20 htb rate 1kbit ceil 62kbit prio 1
Doesn't make much of a difference, ftp doesn't slow down enough to let the
www page through without (or with little) delay.
I'll keep reading docs and shuffling numbers.
- Christian
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2002-04-15 8:09 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-15 7:18 [LARTC] Tuning HTB Christian Volk
2002-04-15 7:27 ` Stef Coene
2002-04-15 8:09 ` Christian Volk [this message]
2002-04-15 8:55 ` Stef Coene
2002-04-15 10:24 ` Christian Volk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-101885827102928@msgid-missing \
--to=cv5@tengeeks.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox