From: Bill Williamson <batkiwi@happychinchilla.com>
To: lartc@vger.kernel.org
Subject: [LARTC] bridge question (+homepna)
Date: Mon, 22 Apr 2002 03:53:01 +0000 [thread overview]
Message-ID: <marc-lartc-101944731025412@msgid-missing> (raw)
Okay, right now I have: (this may be really bad ascii)
dsl
|(eth0)
router
|(eth1)
---hub---
/ \
hpnabridge ethernet hub
| | | | | |
computers computers
(hpna cards) (ethernet cards)
I have hpna drivers working great for linux, so getting that working/etc is
no biggie.
I wanna switch to:
dsl
|(eth0)
router
(eth2)/ \(eth1)
eth1 would be ethernet as is now, eth2 would be a homepna card.
Right now, since i'm using a hardware hpna->ethernet bridge, the homepna
clients can see the rest of the network fine (same subnet, can use network
neighborhood/etc). How can I accomplish this with my new proposed setup?
At first I thought i would just run dhcpd on both interfaces on different
subnets, but then I remebered that a. network neighborhood and b. lan games
might not work (many games require only 1 cdkey if you play over lan instead
of the internet, and it determines that by being on the same subnet as the
server).
Suggestions/etc?
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
reply other threads:[~2002-04-22 3:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-101944731025412@msgid-missing \
--to=batkiwi@happychinchilla.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox