From: Michael Renner <robe@amd.co.at>
To: lartc@vger.kernel.org
Subject: [LARTC] Routing problem with 2 "wan" interfaces
Date: Fri, 17 May 2002 08:20:36 +0000 [thread overview]
Message-ID: <marc-lartc-102162368905193@msgid-missing> (raw)
Hello!
I've got the following setup:
ippp0 (isdn), ppp0 (adsl), eth1 (internal lan), eth0 (nic dedicated to the
adsl modem)
Firewall rules:
Default 2.4. iptables (everything set to accept) except:
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
iptables -t nat -A POSTROUTING -o ippp0 -j MASQUERADE
Routing Table:
Default gw is set to the ptp partner of ippp0
Problem:
Packets which are received on ppp0 don't get responded (tcpdump shows only
the incoming packets, no responses; stuff like ident lookups from irc
servers time out although a ident server is running and bound to 0.0.0.0)
Connections which get masqueraded through ppp0 with the following ruleset:
ip rule add from 192.168.0.10 to default iif eth1 table 50
ip route add table 50 via <ptp partner of ppp0>
work fine though.
If i switch the default gateway of the system from ippp0 to ppp0 i can
reach ppp0 from the outside w/o any problems, but ippp0 is unreachable.
ip_forward is enabled, rp_filter is disabled.
Do you need any additional information to help me on this?
best regards,
Michael Renner
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
reply other threads:[~2002-05-17 8:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-102162368905193@msgid-missing \
--to=robe@amd.co.at \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox