From: "Muhammed Soyer" <msoyer@ges.net.tr>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] htb error
Date: Mon, 20 May 2002 10:30:07 +0000 [thread overview]
Message-ID: <marc-lartc-102189044926244@msgid-missing> (raw)
In-Reply-To: <marc-lartc-102188415722641@msgid-missing>
ok thnx
I should try this after the work hours :)
people should enjoy the limitless traffic now :)
----- Original Message -----
From: "Martin Devera" <devik@cdi.cz>
To: "Muhammed Soyer" <msoyer@ges.net.tr>
Cc: <lartc@mailman.ds9a.nl>
Sent: Monday, May 20, 2002 1:19 PM
Subject: Re: [LARTC] htb error
Yes .. try 3.4 - it should fix it. Let me know.
Hint: current patch can be reverted by patch -p1 -R .....
devik
On Mon, 20 May 2002, Muhammed Soyer wrote:
> The patch files name was htb3.3-020512.tgz (means 3.3 ? )
>
>
>
>
> ----- Original Message -----
> From: "Martin Devera" <devik@cdi.cz>
> To: "Muhammed Soyer" <msoyer@ges.net.tr>
> Cc: <lartc@mailman.ds9a.nl>
> Sent: Monday, May 20, 2002 12:35 PM
> Subject: Re: [LARTC] htb error
>
>
> Hello,
>
> what HTB version are you using ?
>
> On Mon, 20 May 2002, Muhammed Soyer wrote:
>
> > Hi,
> > I am tryin to shape my routers traffic ..I have read lartc document .HTB is suggested there .So I used htb ..My kernel is 2.4.18 .I patched my kernel and activated the supports ..
> > I have created my classes as follows
> >
> > tc qdisc add dev eth2 root handle 1: htb default 14
> > tc class add dev eth2 parent 1: classid 1:1 htb rate 2mbit ceil 2mbit
> > tc class add dev eth2 parent 1:1 classid 1:10 htb rate 700kbit ceil 1700kbit
> > tc class add dev eth2 parent 1:1 classid 1:11 htb rate 200kbit ceil 1250kbit
> > tc class add dev eth2 parent 1:1 classid 1:12 htb rate 600kbit ceil 1700kbit
> > tc class add dev eth2 parent 1:1 classid 1:13 htb rate 200kbit ceil 1700kbit
> > tc class add dev eth2 parent 1:1 classid 1:14 htb rate 300kbit ceil 1700kbit
> >
> > tc qdisc add dev eth2 parent 1:10 handle 10: sfq perturb 10
> > tc qdisc add dev eth2 parent 1:11 handle 20: sfq perturb 10
> > tc qdisc add dev eth2 parent 1:12 handle 30: sfq perturb 10
> > tc qdisc add dev eth2 parent 1:13 handle 40: sfq perturb 10
> > tc qdisc add dev eth2 parent 1:14 handle 50: sfq perturb 10
> >
> > tc filter add dev eth2 protocol ip parent 1:0 prio 1 u32 match ip dst 194.x.x.254 match ip sport 80 0xffff flowid 1:10
> > tc filter add dev eth2 protocol ip parent 1:0 prio 1 u32 match ip dst 194.x.x.254 flowid 1:11
> > tc filter add dev eth2 protocol ip parent 1:0 prio 1 u32 match ip dst 194.x.x.250 flowid 1:12
> > tc filter add dev eth2 protocol ip parent 1:0 prio 1 u32 match ip dst 194.x.x.200 flowid 1:13
> >
> > At the begining every thing works fine ..But when overlimits begins to occur the class having overlimits hangs the traffic related to that class
> > I have got error messages in syslog as follows
> >
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894047744 then=4294959104 j=46368551
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894072320 then=4294959104 j=46368554
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894096896 then=4294959104 j=46368557
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894121472 then=4294959104 j=46368560
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894146048 then=4294959104 j=46368563
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894170624 then=4294959104 j=46368566
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894195200 then=4294959104 j=46368569
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894219776 then=4294959104 j=46368572
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894244352 then=4294959104 j=46368575
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894268928 then=4294959104 j=46368578
> >
> >
> > these messages continue for ever..
> >
> > What can the problem be ?
> >
> >
> > --------------------------------------------------------------------------------
> >
> > Muhammed Soyer
> >
> >
> >
> >
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2002-05-20 10:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-20 8:45 [LARTC] htb error Muhammed Soyer
2002-05-20 9:35 ` Martin Devera
2002-05-20 10:08 ` Muhammed Soyer
2002-05-20 10:19 ` Martin Devera
2002-05-20 10:30 ` Muhammed Soyer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-102189044926244@msgid-missing \
--to=msoyer@ges.net.tr \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox