From: Leonardo Balliache <leoball@opalsoft.net>
To: lartc@vger.kernel.org
Subject: [LARTC] Routing from a box behind two NAT'ing routers
Date: Wed, 22 May 2002 11:52:13 +0000 [thread overview]
Message-ID: <marc-lartc-102206852807183@msgid-missing> (raw)
In-Reply-To: <marc-lartc-102140980207386@msgid-missing>
Hi,
iproute2 has a command that perhaps could help you.
ip route add default scope global equalize nexthop dev ppp0 \
nexthop dev ppp1
(actually if you know peer addresses of ppp* use it instead).
I've never tried with it but it´s a possibility.
You have to have two NIC in your web server; replace ppp0 and ppp1 with
eth0 and eth1. Also have a look to Alexey iproute2 because he says that
this command equalize load through the 2 NIC. Connect each NIC to each
incoming line using 2 different address space.
Give a feedback telling us your experiences.
Best regards,
Leonardo Balliache
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2002-05-22 11:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-14 20:55 [LARTC] Routing from a box behind two NAT'ing routers Henrik Størner
2002-05-17 10:09 ` William L. Thomson Jr.
2002-05-22 11:52 ` Leonardo Balliache [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-102206852807183@msgid-missing \
--to=leoball@opalsoft.net \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox