From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Devera Date: Wed, 22 May 2002 20:27:21 +0000 Subject: Re: [LARTC] switch to hb3 in production enviroment Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > the linux box uses redhat 7.2 with 2.4.18 kernel patched with htb 2 + bridge firewalling, i have 60 htb classes (from 64 to 512 kbit)each with sqf leaf and I am using U32 filter to select source, destination or port.I also have some firewalling iptables rules. I tested the setup for 15 days and then put it in production enviroment since it was very urgent for me. I am very happy with the erformance and it seems to be rock solid. I read something about htb3 and the new aproachso I was thinking to swithch to htb3. > Daes somebody have some results about htb3 stability in production? > In what shall I expect improvement? Somebody out there did the same thing? You can stay with versio 2 if you are ok. The main difference in htb3 is speed and ability to handle large number of classes. Qualitative parameters should be the same. devik _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/