From mboxrd@z Thu Jan  1 00:00:00 1970
From: Martin Devera <devik@cdi.cz>
Date: Thu, 23 May 2002 15:24:14 +0000
Subject: Re: [LARTC] BURST and CBURTS on HTB.init 8.3
Message-Id: <marc-lartc-102216753127913@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-102216537325432@msgid-missing>
In-Reply-To: <marc-lartc-102216537325432@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

in typical scenarios you can use default values. Higher
one will result in higher burstiness but also to slightly
faster computation (for >1Gbit links :).
It is here probably becaus older htb didn't compute defaults.
devik

On Thu, 23 May 2002, Alexandre M. Mello wrote:

> why the exemple in the htb.init of the BURST e CBURST comes with values if the dafault is computed?
> Is it better to put these values manualy?
> How can I calculate the values?
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/