[LARTC] assertion failed with HTB

["frip" <frip@bigfoot.com>]

Hello,

I've built my 2.4.17 with HTB in order to control outgoing traffic for
p2p protocols.

Everything seems to be ok but I'm getting this error message in the
/var/log/messages:

May 25 00:31:25 plomboire kernel: KERNEL: assertion (delay > 0 && delay
< 5000000) failed at sch_htb.c(416):htb_add_to_wait_tree



Here is my starting script:

tc=tc.htb
if=ppp0

$tc qdisc del dev $if root

$tc qdisc add dev $if root handle 1: htb default 12

AC="$tc class add dev $if parent"
# root class
$AC 1:   classid 1:1   htb rate 120kbit ceil 120kbit
# p2p class
$AC 1:1  classid 1:10  htb rate 30kbit  ceil 40kbit
# p2p edk class
$AC 1:10 classid 1:110 htb rate 20kbit  ceil 25kbit
# p2p dc class
$AC 1:10 classid 1:120 htb rate 20kbit ceil 25kbit
# default class
$AC 1:1  classid 1:12  htb rate 120kbit ceil 120kbit

# outgoing edk
$tc filter add dev $if protocol ip parent 1:0 prio 1 u32 match ip dport
4662 0xffff flowid 1:110
# outgoing dc
$tc filter add dev $if protocol ip parent 1:0 prio 1 u32 match ip dport
412 0xffff flowid 1:120

$tc qdisc add dev $if parent 1:110 handle 10: pfifo limit 5
$tc qdisc add dev $if parent 1:120 handle 20: pfifo limit 5
$tc qdisc add dev $if parent 1:12  handle 30: tbf rate 120kbit latency
50ms burst 1500

Any idea?

TIA!

Frip'
frip@bigfoot.com



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/