From: "M.F. PSIkappa" <psi@platon.atlantis.sk>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] frame relay
Date: Mon, 03 Jun 2002 12:17:54 +0000 [thread overview]
Message-ID: <marc-lartc-102310671825452@msgid-missing> (raw)
Hi,
you can use frame-relay with any synchronnous card which use Generic HDLC
layer for linux (http://hq.pm.waw.pl/hdlc/), it's part of standard kernel.
Not only special FRAD devices known frame-relay.
Look at kernel source which card are supported, E.g. I use old MOXA C101
and I have no problem.
If you need E1 (G703/G704) port, you can use interface media converter,
but price for synchronnous card + media converter is common greater than
special FRAD card.
On Thu, 23 May 2002, Andreani Luca wrote:
> Hi,
>
> I need some information about frame relay support under linux.
> In particular I wonder if it is possible to use frame relay over E1 port
> without buying a specific card (sangoma s series and similar...)
> Are there any driver freely available?
>
> Many thanks,
>
> Luca
--
`)_|_(' PSIkappa
I k psi _at_ atlantis.sk
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2002-06-03 12:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-03 12:17 M.F. PSIkappa [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-05-23 13:29 [LARTC] frame relay Andreani Luca
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-102310671825452@msgid-missing \
--to=psi@platon.atlantis.sk \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox