From: "Dan Farino" <DFarino@Stamps.com>
To: lartc@vger.kernel.org
Subject: [LARTC] Extremely inaccurate results using either TBF or HTB
Date: Tue, 12 Nov 2002 08:57:21 +0000 [thread overview]
Message-ID: <marc-lartc-103709153501207@msgid-missing> (raw)
[-- Attachment #1: Type: text/plain, Size: 1460 bytes --]
Hi everyone,
I am getting extremely inaccurate results from my setup:
- RedHat 8.0 on a Compaq ProLiant 1600, dual PII/450, Intel Dual 100 NIC
- I've tried both SMP and non-SMP kernels.
- I'm using the updated tc from the HTB home page.
- I'm using the HTB that comes with the RH8 kernel.
Here's what's happening. If I, for instance:
tc qdisc add dev eth2 root tbf rate 1.9mbit buffer 20Kb/8 limit
15Kb
Then my download rate goes at 360,000 bytes/s, which, by my
calculations, is 2.77mbit. I am using Win2k perfmon to test the speed.
The line is flat and the speed is very consistent (consistently *wrong*,
unfortunately...)
Immediately after, I do:
tc qdisc change dev eth2 root tbf rate 1.8mbit buffer 20Kb/8 limit
15Kb
My download speed is then 243,000 bytes/s, or 1.85mbit. Again, very
flat, consistent line.
I have played with the parameters on both TBF and HTB in many different
configurations. I always seem to have a large jump between 1.8-1.9. I
can't find any number between those two that will actually produce a
2mbit limit. I know 1.85 is close to 2.0, but is this the expected
margin of error? (Then again, 2.77 isn't close to 1.9 at all, so I hope
not!)
Has anyone else experienced anything like this?
Thank you very much for any help you can provide!
Dan Farino
Sr. System Engineer
Stamps.com, Inc.
Santa Monica, CA
[-- Attachment #2: Type: text/html, Size: 6342 bytes --]
next reply other threads:[~2002-11-12 8:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-12 8:57 Dan Farino [this message]
2002-11-12 16:09 ` [LARTC] Extremely inaccurate results using either TBF or HTB Stef Coene
2002-11-12 16:58 ` Dan Farino
2002-11-12 18:07 ` Stef Coene
2002-11-12 23:11 ` sufcrusher
2002-11-13 7:02 ` Dan Farino
2002-11-13 7:06 ` Dan Farino
2002-11-13 8:21 ` Stef Coene
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-103709153501207@msgid-missing \
--to=dfarino@stamps.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox