Jannes,
That worked great! Everything is dead-on accurate now.
Thank you very much for your help!
Dan Farino
Sr. System Engineer
Stamps.com, Inc.
Santa Monica, CA
-----Original Message-----
From: sufcrusher
[mailto:sufcrusher@zonnet.nl]
Sent: Tuesday, November 12, 2002
3:11 PM
To: Dan Farino;
lartc@mailman.ds9a.nl
Subject: Re: [LARTC] Extremely
inaccurate results using either TBF or HTB
This worked miracles for me:
change
/usr/src/linux/include/net/pkt_sched.h
PSCHED_CLOCK_SOURCE to PSCHED_CPU if you have a cpu with timestamp
counter (TSC) that will give you Mhz timer granularity.
(don't forget to recompile of course)
Jannes Faber
----- Original Message -----
From: Dan Farino
Sent: Tuesday, November 12, 2002 9:57 AM
Subject: [LARTC] Extremely inaccurate results using either TBF or HTB
Hi everyone,
I am getting extremely inaccurate results from my setup:
- RedHat 8.0 on a Compaq ProLiant 1600, dual PII/450, Intel Dual 100 NIC
- I’ve tried both SMP and non-SMP kernels.
- I’m using the updated tc from the HTB home page.
- I’m using the HTB that comes with the RH8 kernel.
Here’s what’s happening. If I, for instance:
tc qdisc add dev eth2 root tbf rate 1.9mbit buffer 20Kb/8 limit 15Kb
Then my download rate goes at 360,000 bytes/s, which, by my calculations, is 2.77mbit. I am using Win2k perfmon to test the speed. The line is flat and the speed is very consistent (consistently *wrong*, unfortunately…)
Immediately after, I do:
tc qdisc change dev eth2 root tbf rate 1.8mbit buffer 20Kb/8 limit 15Kb
My download speed is then 243,000 bytes/s, or 1.85mbit. Again, very flat, consistent line.
I have played with the parameters on both TBF and HTB in many different configurations. I always seem to have a large jump between 1.8-1.9. I can’t find any number between those two that will actually produce a 2mbit limit. I know 1.85 is close to 2.0, but is this the expected margin of error? (Then again, 2.77 isn’t close to 1.9 at all, so I hope not!)
Has anyone else experienced anything like this?
Thank you very much for any help you can provide!
Dan Farino
Sr. System Engineer
Stamps.com, Inc.
Santa Monica, CA