From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rimas" Date: Thu, 05 Dec 2002 18:40:33 +0000 Subject: Re: [LARTC] HTB on kernel 2.4.20 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Stef, Then I use tc -s -d class show dev eth0 - yes the sent counters are increasing. myshaper script have missed ( iptables -t mangle -A MYSHAPER-IN -j IMQ "this part --todev 1") and so I can shape incooming and outgoing trafic without any problems. Thank you for the command tc -s -d class show dev eth0. But I still cannot use htb.init script (like you know it is much easer to use it, write rules) How I may check that problem? Best Regards Rimas ----- Original Message ----- From: "Stef Coene" To: "Rimas" ; Sent: Thursday, December 05, 2002 5:04 PM Subject: Re: [LARTC] HTB on kernel 2.4.20 > On Thursday 05 December 2002 12:18, Rimas wrote: > > Hi, > > > > > > I have a Linux box with kernel-2.4.20 HTB, IMQ patch + iptables-1.2.7a with > > IMQ and patched tc. > > I tried to use htb.init script, wondershaper and myshaper > > (http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ADSL > >- Bandwidth-Management-HOWTO.html). > > And seems to be the htb doesn't work (doesn't shape a trafic at all) > > I get no error messages. > > > > How I may check it what is wrong? > You can do tc -s -d class show dev eth0 and examine the sent counters. Are > they increasing ??? > > Stef > > > -- > > stef.coene@docum.org > "Using Linux as bandwidth manager" > http://www.docum.org/ > #lartc @ irc.oftc.net > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/