From mboxrd@z Thu Jan  1 00:00:00 1970
From: Paolo Poletti <paolo_poletti@libero.it>
Date: Tue, 10 Dec 2002 16:18:44 +0000
Subject: Re: [LARTC] tbf : rate and effective speed (newbie)
Message-Id: <marc-lartc-103953682903578@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-103953508700943@msgid-missing>
In-Reply-To: <marc-lartc-103953508700943@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

This was my error. Thanks again.

Andrea Rossato wrote:

> Paolo Poletti wrote:
>
>> # tc qdisc add dev eth0 root tbf rate 10kbit latency 50ms burst 1000
>>
>> Then i've tried to transfer a big (20 Mbyte) file onto my lan, using 
>> ftp and the client (ncftp) is saying that the average transfer speed 
>> is 39.71 kB ( around 400 kbit). What i'm missing ?
>
>
> you are shaping outgoing traffic: so if you want to give it a try you 
> must upload!
> to shape incoming traffic you need either ingress qdisc or IMQ : have 
> a look at LARTC.
> you are downloading at 300kbit, by the way: 39.71*8
>
> bye
> andrea
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/