From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kenneth Porter Date: Tue, 17 Dec 2002 22:15:39 +0000 Subject: [LARTC] WonderShaper on LAN link kills to-host speed Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I tried installing the WonderShaper on my internal link, mostly to get the SFQ installed. I set uplink and downlink to 100000 to match the link speed and changed the bandwidth on the cbq line to 100mbit. This killed transfer speed *to* the box, knocking it from 30-40 Mbps down to about 800 kbps. Commenting out just the ingress control restored the speed. What about the ingress policer would do that? Here's the effective line after shell expansions: tc filter add dev eth0 parent ffff: protocol ip prio 50 u32 match ip src \ 0.0.0.0/0 police rate 100000kbit burst 10k drop flowid :1 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/