From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Mindaugas Riauba" Date: Thu, 19 Dec 2002 09:09:22 +0000 Subject: Re: [LARTC] linux bridging and htb.init / cbq.init Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > I'am successful using a linux (2.4.20) bridge and the cbq.init_v0.7 > script for traffic shaping. But I can only use the queuing discipline > tbf (LEAF=tbf). If I try use queuing discipline sfq or none then tc > applies the rules but no shaping occurs. > Is this problem a normal behavior when using bridging ? > > I tried to use htb.init (using patched tc binary). It accepts > the rules but also no shaping occurs (tested with all queuing > disciplines (LEAF=none|sfq|pfifo). > Why it doesn't work together with bridging ? Works for me. View my previous post about exceeding limits. It applies to this setup with shaping bridged traffic. Mindaugas _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/