From: Nestor S A Melo <nestor@cyclades.com.br>
To: lartc@vger.kernel.org
Subject: [LARTC] Filter in HTB not working
Date: Thu, 19 Dec 2002 12:06:22 +0000 [thread overview]
Message-ID: <marc-lartc-104029961502754@msgid-missing> (raw)
I have a problem in setting up HTB.
It appears filters doesn't work at all, besides "tc filter show" show it as
being correctly configured.
Class 1:10 never sent any traffic, but as iptables show below, it should be
sending packets.
The HTB version I'm using is 3.3, with kernel 2.4.17.
The setup is as follows:
---------------------------------------------------------------
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1 htb default 20 r2q 10
tc class add dev eth0 parent 1: classid 1:2 htb rate 256kbit
tc class add dev eth0 parent 1:2 classid 1:10 htb rate 26kbit ceil 128kbit
prio
1
tc qdisc add dev eth0 parent 1:10 handle 10 sfq perturb 10
tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip sport 23
0xffff classid 1:10
tc class add dev eth0 parent 1:2 classid 1:20 htb rate 220kbit ceil 256kbit
prio 2
tc qdisc add dev eth0 parent 1:20 handle 20 sfq perturb 10
---------------------------------------------------------------
The stats:
---------------------------------------------------------------
[root@NL1000 htb]# tc -s -d qdisc show
qdisc sfq 20: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 10sec
Sent 5116 bytes 94 pkts (dropped 0, overlimits 0)
qdisc sfq 10: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc htb 1: dev eth0 r2q 10 default 20 direct_packets_stat 0 ver 3.6
Sent 5116 bytes 94 pkts (dropped 0, overlimits 0)
[root@NL1000 htb]# tc -s -d class show dev eth0
class htb 1:10 parent 1:2 leaf 10: prio 1 quantum 1000 rate 26Kbit ceil
128Kbit
burst 1632b/8 mpu 0b cburst 1762b/8 mpu 0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 401969 ctokens: 88149
class htb 1:2 root rate 256Kbit ceil 256Kbit burst 1926b/8 mpu 0b cburst
1926b/8 mpu 0b level 7
Sent 5116 bytes 94 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 46975 ctokens: 46975
class htb 1:20 parent 1:2 leaf 20: prio 2 quantum 2816 rate 220Kbit ceil
256Kbit burst 1880b/8 mpu 0b cburst 1926b/8 mpu 0b level 0
Sent 5116 bytes 94 pkts (dropped 0, overlimits 0)
lended: 94 borrowed: 0 giants: 0
tokens: 53324 ctokens: 46975
[root@NL1000 htb]# tc -s -d filter show dev eth0
filter parent 1: protocol ip pref 100 u32
filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800
bkt
0 flowid 1:10
match 00170000/ffff0000 at 20
[root@NL1000 htb]# iptables -t mangle -L -nvx
Chain PREROUTING (policy ACCEPT 3590 packets, 557751 bytes)
pkts bytes target prot opt in out source
destination
0 0 MARK tcp -- * * 0.0.0.0/0
0.0.0.0/0 tcp dpt:23 MARK set 0x6
146 12954 MARK tcp -- * * 0.0.0.0/0
0.0.0.0/0 tcp spt:23 MARK set 0x6
Chain OUTPUT (policy ACCEPT 315 packets, 16936 bytes)
pkts bytes target prot opt in out source
destination
---------------------------------------------------------------
So, what is going wrong?
Thanks in advance,
--
_____________________
Nestor S A Melo
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2002-12-19 12:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-19 12:06 Nestor S A Melo [this message]
2002-12-19 12:50 ` [LARTC] Filter in HTB not working Corey Rogers
2002-12-20 2:31 ` Miguel Figueiredo
2002-12-20 21:13 ` Stef Coene
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-104029961502754@msgid-missing \
--to=nestor@cyclades.com.br \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox