From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nickola Kolev Date: Sun, 22 Dec 2002 09:02:05 +0000 Subject: Re: [LARTC] Filter MAC address MIME-Version: 1 Content-Type: multipart/mixed; boundary="=.D.ui'YC5dMkH2v" Message-Id: List-Id: References: In-Reply-To: To: lartc@vger.kernel.org --=.D.ui'YC5dMkH2v Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit On Sun, 22 Dec 2002 07:33:24 +0000 (GMT) Qos Switch wrote: > > Hi everyone, > > I need to classified the traffic by looking at the packet destination and source MAC address. Can anyone here suggest ways to do this. > > I have read through the HOWTO documentation, from there I know that U32 filter can only filter out IP or higher layer. May I know why U32 filter did not support datalink layer (MAC address)? Is it that when packet entering TC, the datalink layer no longer there? Are there any filter which can filter the MAC address? > > Before this, I have successfully implement QoS through source and destination IP address using CBQ. Here I would like to thanks LARTC for the help. > Yes, you can do this, but using fw marking, not u32 classifier. Just search through the various netfilter extensions - you really can do miracles with them :)) E-gards, Nickola --=.D.ui'YC5dMkH2v Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+BX+RKagUb5QT4IYRAt6BAKCF5Bwe6T9x9wWszgfdqLYz6eefxgCgwpxK AsJfWvrVLXli3eCg3s/ffDo= =8jSv -----END PGP SIGNATURE----- --=.D.ui'YC5dMkH2v-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/