From: "listuser" <listuser@myrealbox.com>
To: lartc@vger.kernel.org
Subject: [LARTC] udp broadcast over ipsec
Date: Thu, 26 Dec 2002 05:08:35 +0000 [thread overview]
Message-ID: <marc-lartc-104087926624513@msgid-missing> (raw)
Hello all,
I am configuring a vpn between freeswan and windows 2000. I am following the steps at http://www.jacco2.dds.nl/networking/win2000xp-freeswan.html, to get the VPN up and running. using this I have a ppp tunnel between windows and linux, which is inside a l2tp tunnel which is again encrypted by IPSec. (the url gives the configuration in detail and I have followed it exactly)
Now the windows gets the proper ip and every thing is working as it should except udp brpadcast, which is the reason why I set up the vpn (for a stock exchange, where the quots data comes as b'cast). Since the windows is having an ip in the same network their is no reason why B'cast should not work.
I searched a lot for any pointer but I found only one MS Knowledge Base Article No. 253169 which says that B'cast is not supported in Windows IPSec. Is this the case with Linux also. Is their any thing that can be done to send B'cast also. Any help here will be much appriciated. I am working though Xmas to get this working :(
raj
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2002-12-26 5:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-26 5:08 listuser [this message]
2002-12-27 0:16 ` [LARTC] udp broadcast over ipsec Jason A. Pattie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-104087926624513@msgid-missing \
--to=listuser@myrealbox.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox