[LARTC] Routing between two RFC1918 networks.

["Dave Hunt" <dave.hunt@unison.ie>]

[-- Attachment #1: Type: text/plain, Size: 1081 bytes --]

 
Hi all, 
 
I've two RFC1918 networks with a RedHat Linux 7.3 box in the middle.
They are 10.4.2.0 and 10.4.7.0. There are a couple of boxes on each
network,
but I can't ping a box on one network from the other.
 
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
217.78.4.128    *               255.255.255.192 U     0      0        0
eth2
10.4.7.0        *               255.255.255.0   U     0      0        0
eth3
10.4.2.0        *               255.255.255.0   U     0      0        0
eth0
192.168.200.0   *               255.255.255.0   U     0      0        0
eth1
127.0.0.0       *               255.0.0.0       U     0      0        0
lo
default         217.78.4.190    0.0.0.0         UG    0      0        0
eth2

The above is the routing table of the machine. All iptables policies are
set to accept.
I can access the internet fine from the 192 and 10 networks, as
masquerading is enabled on eth2.
However, I do not want to masquerade the address from 10.4.2.0 onto
10.4.7.0 
and vice-versa.
Am I missing something obvious?
Cheers,
Dave.
 

[-- Attachment #2: Type: text/html, Size: 3964 bytes --]