From mboxrd@z Thu Jan 1 00:00:00 1970 From: "William L. Thomson Jr." Date: Thu, 02 Jan 2003 22:30:56 +0000 Subject: Re: [LARTC] 3c905 or intel with 82550 chip? for htb + bridge + Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thu, 2003-01-02 at 13:58, Stef Coene wrote: > > The chip doesn't mather. All shaping is done in the kernel so in software. > With that said, I use and recommend Intel nics. I used to use some 3com ones, but they were crap. I personally like the 82557-9, mostly the 9's since they are tiny. But basically any Intel card that is supported by the e100 driver. The e100 driver for Intel cards is my favorite. Intel is always releasing new versions. Not to mention the IANS software that is also available. My two cents, Intel all the way. -- Sincerely, William L. Thomson Jr. Support Group Obsidian-Studios Inc. 439 Amber Way Petaluma, Ca. 94952 Phone 707.766.9509 Fax 707.766.8989 http://www.obsidian-studios.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/