From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tobias Geiger Date: Mon, 06 Jan 2003 16:52:33 +0000 Subject: Re: [LARTC] Depth-argument for sfq? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Steen Suder, privat wrote: > I'm not a programmer per se (including C), but... > > I'd like to be able to give the define in sch_sfq.c (of, say, 2.4.20), > SFS_DEPTH other values than 128 as an argument on the tc commandline. It > could be powers of two up to 2^7 (128) as it seems that 128 is the > current maximum. > > I'm a little anxious to ask the question "How do I do that?" ;-) > Instead I'd like to hear if anyone has done something similar? > AFAIK a qdisc named "esfq" allready exists where you can setup things like Depth and other parameter. search the mailling-list archive on lartc.org for the URL (last time i compilied it was for 2.4.18; i hope they made the code 2.4.20 ready ?) Greetings Tobias _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/