From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corey Rogers Date: Thu, 09 Jan 2003 14:45:16 +0000 Subject: [LARTC] Shaping on multiple interfaces results in losing the box Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, I'm using the latest HTB patch on a custom 2.4.18 kernel. The kernels either include freeswan 1.98b or super-freeswan 1.99. When i attempt to shape on 1 interface .... no problem. I can do this to any interface on the linux box including. The minute I add the second set of shaping commands to another ethernet interface I lose the box. I normally set the box to reboot in a certain time when i'm running these scripts however the box does not reboot and is rendered unaccessible unless I'm on site. I also as a precaution allow the script to sleep for a period of time after which it clears the shaping from the interfaces ... it doesn't take. I recently tried this in house on 2 test systems. However using kernel 2.4.20 with HTB etc enabled and installed super-freeswan 1.99 as packaged by Ken Bantoft. As with the machines I lost ... freeswan is not active. I atempted to shape 2 of the 4 interfaces on the machines ... IT WORKED. Problem is the machines in the field are currently live. I can't bring them down until after hours or late on weekends. And I would have no one there to reset the systems. Any ideas as to why this is happening and or how to stop this? -- Corey Rogers _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/