From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rohit Talukdar Date: Mon, 13 Jan 2003 14:18:20 +0000 Subject: [LARTC] is there an error here ? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org 1. am a newbie in traffic shaping . was going thru http://www.docum.org/stef.coene/qos/faq/#2 Under the para titled "Basic rules for traffic shaping with HTB" there is this line that reads: So 10, 200 and 300 are leaf classes = they have no child classes. And class 1 has a maximum of 100 due to the link limitation. So it really can't use more then 100. pardon me if i am wrong, but shouldnt (after looking at the figure) 20, 200 and 300 be the leaf classes instead of 10, 200 and 300. ( really apreciate the yeoman service rendered by stef coene in enlightening newbies like me) 2. also, [root@xyz root]# ip link list 1: lo: mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc cbq qlen 100 link/ether 00:80:ad:77:6b:46 brd ff:ff:ff:ff:ff:ff [root@xyz root]# ip rule list 0: from all lookup local 32766: from all lookup main 32767: from all lookup 253 after adding the rules (using tc), what command should i use the list all the rules thanks in advance nerd _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/