[LARTC] HTB classes, ceil and prio

["Remus" <rmocius@auste.elnet.lt>]

Hello,

I'm looking some recommendation how to configure htb.
I have ADSL 512k/256k connection at my home for the 3 clients PCs and one
Linux Box like firewall.

Network looks like usual:
ADSL connection (eth0) - | firewall | - (eth1) local network

I would like to divide Internet connection like this:
Download eth0 (512K)
SSH/IPSec rate%6k, ceilQ2k and prio=0 (it can be used from the local PC1
or PC2)
PC1 1.2.3.1(local ip) rate\x170k, ceilQ2k and prio=1
PC2 1.2.3.2 (local ip) rate\x170k, ceilQ2k and prio=1
PC3 1.2.3.3 (local ip) rate\x170k, ceilQ2k and prio=1
SMTP server (exist on firewall) ratedk, ceil\x128k and prio=2 or better 1

Do I understand right if some of PCs (PC1or PC2) use SSH/IPsec it gets speed
from 256k up to 512k if it not in use.
Two anothers PCs and SMTP server share 256k between them. Is that right?
What speed they get each?

Upload eth0 (256k) htb/imq
SSH/IPSec rate\x128k, ceil%6k and prio=0 (it can be used from the local PC1
or PC2)
PC1 1.2.3.1(local ip) rate€k, ceil%6k and prio=1
PC2 1.2.3.2 (local ip) rate€k, ceil%6k and prio=1
PC3 1.2.3.3 (local ip) rate€k, ceil%6k and prio=1
SMTP server (exist on firewall) ratedk, ceil\x128k and prio=2 or better 1

If I'm not correct just correct me, please.
Is it enough to have only one class or more?

I know that running htb on external eth, htb cannot see local ip addresses.
Can I mark them with the iptables and use it with the htb?
Or do I have to make htb rules on my local eth1 as well?

Thank you in advance for any help/ideas

Remus





_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/