From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Kjell Chris Flor" <kjell@mastercad.se>
Date: Sun, 02 Mar 2003 10:51:31 +0000
Subject: [LARTC] (no subject)
Message-Id: <marc-lartc-104660254011247@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-98373938216902@msgid-missing>
In-Reply-To: <marc-lartc-98373938216902@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hi

In the introduction of IMQ ( http://luxik.cdi.cz/~patrick/imq/ )
it sais:

Quote start.
"This allows you to treat network devices 
as classes and distribute bandwidth among 
them as well as doing real ingress traffic 
control using egress qdiscs"
quote stop.

Where and how exactly do I tell that a HTB 
class should use which phy. dev.?

I fail to see where this is done in the 
example at the ref. link over. 



Kjell


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/